Click Here
to display this section in its own window.
Wanted
|
Watch out for scammers trying to sell you EXACTLY what you're looking for. A typical scammer will have NO IDEA about details on the item he's trying to sell (scam) you. They might ask you to call a cell number. Write me if you have any questions. |
email: warred2000
at: yahoo.com
Date: January 29, 2012
Pair of EMD (NW) style trucks. Preferably ones that are set up for four axle pulling. Will be used with electric motors, 7.5" gauge, new or used.
email: BWMax128
at: aol.com
Date: January 27, 2012
Old Tom Bee couplers only, in the closed position, take out the pin that holds the knuckle in, if it stays closed, those are what i want, thanks, ryan.
email: steamboatbill
at: sbcglobal.net
Date: January 24, 2012
7.5" gauge steam loco, propane fired. Contact with details, pictures, location, and asking price. Must fit in a prius.
email: boggiosorchard
at: hotmail.com
Date: January 22, 2012
Narrow 24" gauge, rolling stock, train with cars and caboose, track, etc.
email: kdpd
at: cox.net
Date: January 19, 2012
Pair of 1"inch scale, 4 3/4"inch gage, commonwealth, 6 wheel, TENDER trucks.
email: wacopsc
at: aol.com
Date: January 17, 2012
Hodges or Ottaway handcars, best regards, paul.
email: victor6
at: bellsouth.net
Date: January 16, 2012
Atlas/Craftsman horizontal mill. Would be happy if within 300 miles of atlanta, can not travel too far. thanks.
email: tunnelrailway
at: msn.com
Date: January 12, 2012
Half size MCB knuckle couplers. To restore two 24" gauge electric locomotives. Couplers are needed to make these locos complete. Thanks!
email: ttexcavating
at: hotmail.com
Date: January 11, 2012
2 foot gauge steam engines, if anyone has or knows of any please call 828-387-6863.
email: jerrybraun1
at: comcast.net
Date: January 11, 2012
1.5" scale brass or bronze working bottom mounted mounted bell. Cash or trade, hobby foundry castings.
email: ttexcavating
at: hotmail.com
Date: January 11, 2012
I want to trade a very nice 1/3 scale case traction engine for a 7.5" gauge steam engine, 828-387-6863.
email: victor6
at: bellsouth.net
Date: December 31, 2011
Benchmaster mill in decent condition. can not travel far, in Georgia. Would trade +/- cash for my Sanford bench surface grinder. Thanks.
email: robertcbriggs
at: yahoo.com
Date: December 31, 2011
Plans for a F3 powered trucks, 7.5 gauge.
email: timfreeman
at: nctv.com
Date: December 27, 2011
15" gauge steam engine, pump cart, cars, ect. Running or not.
email: song_rr
at: roadrunner.com
Date: December 26, 2011
A used 12" or 15" gauge archbar truck.
email: fhawreluk
at: hotmail.com
Date: December 26, 2011
Older steam engine, from 1960's or before, particularly of a fleischmann or marklin. My price range is from $200-$500 in Canadian dollars.
email: davidparks
at: ftcweb.net
Date: December 25, 2011
Full scale plans for a steam engine 4-4-0.
email: amtk.763nth.sba
at: sbcglobal.net
Date: December 22, 2011
Students looking for a REASONABLY priced steam locomotive project. (not 25k for a chassis!) Preferably a ten-wheeler or larger. Thanks!
email: bartonjoshua69
at: yahoo.com
Date: December 18, 2011
7.5" gauge engine, (under $1,000!!), little gasser or electric. Please contact me.
email: info
at: crowleyentertainment.com
Date: December 15, 2011
Boiler or boiler plans for a 1.5" scale 4-6-2 pacific locomotive.
email: jmaximsulzer
at: kc.rr.com
Date: December 14, 2011
TWO MTC G-16 passenger car trucks with 16" gauge wheels. Need with brake cylinders and complete brake rigging. Please advise condition, location and asking price. thanks.
email: 2jackmans
at: gmail.com
Date: December 11, 2011
Two steel or bronze casted 1.5" or 1.6" scale couplers with the uncoupling pin on top. I will trade two new casted steel couplers with the uncoupling pin on the bottom.
email: howellj
at: cityoflakeforest.com
Date: December 11, 2011
G12 to restore as a father-son project that needs work. I am in the chicago area.
email: beng243
at: inbox.com
Date: December 10, 2011
Small 7.5" gauge, 1/8th scale 0-4-0 switcher project. Must be pre-machined if a project.
email: shanrock
at: customboardwks.com
Date: December 07, 2011
Train-have snow removal equipment for trade, or other equipment-air plane, boats. Terry 320-815-2342.
email: railfare
at: cox.net
Date: December 02, 2011
2-1/2" scale, 7-1/2" gauge "bobber" or "shorty" 4 wheel caboose. State age, condition and asking price. Email photos if available.
email: patvm
at: providenet.com
Date: November 30, 2011
Small steam loco for display only. Ideal is a logging loco. Would hook up with my box car and caboose.
email: livesteamer97
at: yahoo.com
Date: November 28, 2011
A decent, RUNNING, used 3-1/2" gauge live steam locomotive for a reasonable price. Must have axle and hand pumps. Injector, riding car, and firing tools++.
email: pvillere
at: bellsouth.net
Date: November 27, 2011
7 1/2" gauge riding train set, preferably electric, simple to operate, and in excellent condition. will buy whole set or loco., cars, and track separately.
email: rshar420
at: yahoo.com
Date: November 26, 2011
A kit for building the OS britannia in 3.5" gauge, or the OS BR24 in 4-3/4" gauge, or the OS 4 truck shay. 408-608-8787.
email: pamw0001
at: yahoo.com
Date: November 26, 2011
Any little engines 1/2" scale castings. Preferably unmachined. Cylinder blocks.. drivers.. rods.. trailing trucks.. etc, etc.
email: wacopsc
at: aol.com
Date: November 25, 2011
"Rail Pup" in 7 1/4" gauge, freewheeling if possible.
email: koolbreeze2401
at: aol.com
Date: November 23, 2011
Full sized rail style trolley/interurban car to be used inside a restaurant. Any and all conditions.