|
7.5" ga. 3" scale “Lizard” 0-4-2T
SOLD
click
“Lizard”
1915, 30” Gauge Hawaiian Plantation Style 0-4-2T
A great jump-start to
a small and charming Live Steamer! 7 1/2” gauge, 3” Scale, based on Allen
Models CHLOE. Highest quality professional machining and detailing by a
professional model-maker and owner/builder Bill Gould.
All difficult
machining finished, up to boiler stage, with minor completion required to
running gear, such as hardening the links and final bolt-up of the cylinders to
the frame. Features Stephenson valves fitted with Thompson Balance Valves, steam
brakes and custom brake valve (featured in a Live Steam Magazine series),
super-sounding whistle, and patterns for domes, bell stand and stack top. Frame
machined-all-over. Shown with mock-up of cab, tank and boiler, which I used to
set overall “look” and finalize appliance locations and design prior to
fabricating the boiler. Design is for a much larger boiler diameter (6” Schedule
40, 6.625 OD) and capacity than the Chloe, to be fitted into the smoke-box to
allow for appropriate lagging. Drivers are precision keyed to the axles, but
remain loose for disassembly, prior to final assembly and bonding with
industrial grade Loctite. Full Allen blueprint set and my layout sketches
included.
Asking $5500.
REDUCED to $4800 Location:
Fallbrook, CA, between San Diego and Los Angeles. Crating and shipping available
at cost plus 5%. Rolling work stand included only if picked up, as it cannot be
shipped.
SOLD
Volstro Milling
Attachment
SOLD
click
The famous
“Volstro Milling Attachment”, for the Bridgeport
J or 2J head. Provides precision rotary and X axis motions. Used for
precision milling of cams, pockets, splines and curves, it’s “what we used
before CNC”, and remains a valuable machining accessory for the manual or
non-CNC shop. Can be used as a “speeder” for small diameter cutters.
Power-drive accessory included for rotary motion via take-off pulley and
belt.
Cross slide: .001
graduations, .050 quick-read scale, 3” offset. Rotational: 360˚ continuous
feed, 1˚ increments, 5 minute readings. Fully equipped with all
accessories, collets, wrenches, etc. Mint condition, S/N 4964, 1981
vintage, in factory-fitted carrying case, with complete instructions.
Weight, complete
in carrying case: 45 lbs. $650.00 firm. Packing, handling and
FedEx Ground shipping extra at $75 in continental USA.
SOLD
Live
Steam Magazine
SOLD
258 issues, from 1967
to 2002. Excellent to mint condition, unbound. Some issues missing. $250 as one lot. I
will not break the collection. Estimated weight: 100 lbs.
Mainline Modeler Magazine
SOLD
A premier bi-monthly
noted for the superb drawings and prototype information. 289 issues, from
rare Charter Issue Volume I, #1 (1980) to final issue in 2006. 16 issues
missing. Excellent to Mint
condition, unbound.
$350 as one lot. I
will not break the collection. Estimated weight: 165 lbs. FOB:
Fallbrook, CA 92028 (halfway between San Diego and Los Angeles)
Crating/shipping/handling is available at cost plus 5%.
Model Engineer Magazine Collection for Sale
SOLD
The early years!
SOLD
Rare opportunity to add
102 bound volumes of the classic Model Engineer Magazine to your library, from
the very first 1898 Vol. 1 #1, to Vol. 145, 1979, plus many later issues. It was
published bi-weekly until WWII.
The very rare pre-1910 issues are filled with many exciting projects from
legendary makers and inventors who helped shaped the future of Industry. The
issues released during World War II are extremely rare, and focus on endeavors
that modelers did to aid the war effort.
A timeless resource, featuring all the classic makers and their exceptional
models, tips and projects!
$750, sold as one lot. I will not break this collection. FOB: Fallbrook, CA 92028.
Estimated weight: 400 lbs. Bookcase included if picked up!
Crating/shipping/handling is available at cost plus 5%.
|
