SOLD

 
click images

This 1" scale 4 3/4" gauge 4-6-2 Pacific is a (using a modelers term) kit bashed Little Engines Pacific. I say kit bashed because some components are not standard to Little Engines to the best of my knowledge. The locomotive has box pok drivers, frame (one piece machined), piston valves and home made cab.

Boiler, pilot and trailing truck and other running gear are Little Engines. Engine is fired on propane using a burner design found on the Golden Gate Live Steamers web site www.ggls.org under Tips, Tricks and Plans, Marty burners. The propane is controlled by a regulator and gauge set up in the coal bin of the tender and propane car. The propane car is basically a plywood box on a set of 1 Inch Scale Supply trucks. The car carries up to 5, 4 lb propane tanks manifold together with a regulator and gauge to set the supply pressure (25-30psi) to the tender. The tender is an all steel welded tank with bar stock frame, home built brass/stainless steel hand pump and 1 Inch Scale Supply trucks. Tender tank is powder coat painted inside and out. Located in the coal bin is a twin gauge and regulator to controls the propane pressure at the burner, 1-10 psi. Locomotive also features an axle pump of Little Engines design, and a Power Models twin cylinder steam water pump. The locomotive steams well and pulls quit well, up to 3 adults and 3 children on grades of less than 1.5 percent. The Locomotive and Tender don't match a particular prototype. The engine needs and identity and is in need of detailing. I do have some detail parts included with the locomotive.  Located in Lincoln, NE

I am asking $5500 for the complete ready to run locomotive, tender and propane car with tanks.

 

SOLD