click to view home page

Locomotives  |  Rolling Stock   |  Machine Shop Equipment  |  Full Scale Railroad Items  |  Non Railroad & Steam Items 

To receive email alerts on new items like this,
join the DLS "For Sale"
MAILING LIST




For Sale:  7.5" ga. 4-4-0 American with Tender

   SOLD  


   click images
 

7.5 ga. 1.5 scale 7.5 gauge 4-4-0 American. Engine was finished in 1993. Boiler is all steel tig welded construction with rolled in copper flues. Boiler has always passed hydro test with flying colors , and has never had any problems with any leaks. Engine burns coal and is a good puller..not many castings were used on this locomotive..just wheels and cylinder block from Railroad Supply...most everything else was machined from solid steel, including the connecting rods.

$8,500. Darlington Indiana. I would prefer local pickup, but it can be shipped at buyers expense if needed. I could also make arrangements for me to deliver it within a 300 mile radius of here. Any more specific questions, feel free to contact me.  SOLD  

 


For Sale:  1.5" scale Butterfly Doors

 SOLD

  
 click images
 

1-1/2 inch scale all steel butterfly firedoors with steel operating gears. With doors closed frame measures 4-5/8 wide by 5-1/4 tall. With doors open it is 7-1/2 inches across widest part of butterfly doors. Oval opening measures 2-1/2 inches by 3-3/4 inches...Door locks open in the open position. Butterfly Firedoor and lettering is engraved into the steel and not raised as it would be on a casting which eliminated my need to find a foundry that would deal with small castings.

$225. Price includes shipping by insured mail anywhere in the continental U.S. Darlington Indiana.   SOLD .

 


For Sale:  1.5" scale Feed Water Pump

 SOLD


 click images
 

7.5 gauge 1-1/2 inch scale steam driven twin cylinder water pump. This is a large pump that moves a lot of water, Steam cylinders are 1-1/8 bore and water cylinders are 3/4 inch bore. Pump is 4 inches wide and 7-1/4 inches tall. All steam and water port connections are tapped 1/4 inch model taper pipe thread. It is a new pump that runs very well, has never been installed on a locomotive, just been in a box on the shelf for a long time.

$800. Price includes shipping by insured mail anywhere in the continental U.S. Darlington Indiana.   SOLD .

 


For Sale:  Assorted End Mills

  SOLD  

  
 click images
 

Grab bag of 25 assorted endmills. Shank sizes range from 3/8 inch to 1 inch..with one large 6 flute endmill having a 1 1/4 in shank .....All end mills are either new and unused in there original protective boxes or have been reground by a professional cutter grinding shop and are unused in there protective strippable plastic there dipped in after regrind...Price includes shipping by insured mail anywhere in the continental U.S....First one who buys I will throw in another Half dozen endmills of assorted sizes that are all under 1/2 inch in diameter....If there is a specific size you want with the half dozen, just ask, I probably have it.....

$350. Reduced to $250  Price includes shipping by insured U.S. Mail anywhere in the continental United States. Darlington, Indiana. Contact me   SOLD  

 


For Sale:  Solid Brass Axle Pump

  SOLD  

 
 click images
 

Solid Brass construction twin cylinder axle pump..pump measures 2"x2"x3" with twin 3/4" pump rams...This is an axle pump built for the old railroad supply mikado. It is brand new and has never been used. Inlet and outlet fittings are tapped 1/8 n.p.t and use standard 3/8" brass compression fittings...but these fittings can be removed and replaced with whatever fits your needs..Pump also has to connecting rods bored for 2 inch diameter to run off of axle eccentrics...there is enough room to bore rods out slightly larger if you have larger eccentrics..

$450. Price includes shipping by insured U.S. Mail anywhere in the continental United States. Darlington Indiana. Contact me   SOLD  

 


For Sale:  Class Lights .75-1" scale

  SOLD  

  
 click images
 

Pair of small classification lamps, the globe is 3/4 " diameter....these could be be 3/4 scale or 1 inch scale.... comes with 2 mounting brackets and only 2 amber colored lenses. I have had these on the shelf in the shop for so long, I dont even remember who manufactured them? ..

$45. Price includes shipping by insured U.S. Mail anywhere in the continental United States. Darlington Indiana. Contact me   SOLD  

 


For Sale:  Niagara End Mills

  SOLD  

  
 click images
 

Assortment of Niagara Endmills ...All Endmills are brand new , never used and still in there plastic protective containers....They are All 1 inch Diameter, Except for one of them.. Three are 4 flute with 2 inch length of cut........Two are 5 flute roughing cutters with 2 inch length of cut.........One is a 5 flute roughing cutter with 3 inch length of cut....One is 4 flute with 4 inch length of cut and One is 1.5 inch diameter 2 flute with 1.5 inch length of cut........

$350. Price includes shipping by insured U.S. Mail anywhere in the continental United States. Darlington Indiana. Contact me.  SOLD  

 


For Sale:  1.5" scale Steam Driven Water Pump

  SOLD  

  

click images
 

Single Cylinder steam driven water pump. Pump is new, runs well on air. Has never been used on a locomotive. Steam cylinder is 3/4 inch dia. Water cylinder is 1/2 inch dia. Steam inlet and outlet ports are tapped for 3/16..MTP thread.. Water inlet and delivery ports are Tapped for 1/4 MTP thread...Its is best to have a small hydrostatic lubricator piped into the steam supply side for pump lubrication.  .0
Shipping included.
Darlington Indiana

$600.  Price includes delivery by insured U.S. Mail anywhere in the continental United States.. Outside the U.S. let me know, I will get you a shipping rate. Contact me   SOLD  

 


For Sale:  7.5" ga. Little Engines Crab

  SOLD  

 
 

click images
 

 7.5 Gauge 1 1/2 " scale L.E. Crab locomotive Engine has very minimal run time. Comes with a water crosshead type pump, a single cylinder steam driven water pump and an injector. Boiler passed hydro test with flying colors last time it was checked, but it hasn't run in a few years. Also includes a car that could be used as a riding car behind this engine.

$4,500.  Engine can be picked up by buyer, or I can build a crate and ship at buyers cost. I could even deliver it within a 200 mile of radius of  Darlington Indiana.   SOLD  .

 

 

 

 

 

 

 

 

Info Request Form

Form submission
Item Interested In:
Your Name:
Your Email:
Did you enter your email correctly?

Phone (optional):

Message to the Seller:

Sorry, no vehicle trades or payment plans.  SOLD  
   

 

 

 

 

 

 

 

 

To the best of our knowledge, all items here are as described. Discover Live Steam is not responsible for items listed here.  Buyer beware