I have a 1.5" scale, 7.5" ga. Railbus with new deep cycle
batteries for sale. This engine is a smooth running 24V, 750W
pleasure to operate. It is equipped with a compressor and
receiver tank supplying air for air brakes. It also has full
interior lighting, headlamp, and front coupler.
Reduced to $3,650
for the Railbus. Shipping and crating are not
included in the price. The engine is located in NW Ohio, near
Toledo. Contact me
7.5" ga. 80 Ton GE Industrial
Reduced to $6,075
I have a 24V, 1.5" scale, 7.5" ga., 80 Ton GE Industrial
Switcher for sale. The engine is all steel construction using
1.5" x 2" and 2" x 2" box tubing for the main frame, and 12 ga.
steel for the body. The entire engine is powder coated inside
and out and the windows are plexiglass, enclosing the electrical
systems from the weather. The drive train uses an AmpFlow 40-300
motor driving all four axles and is rated at 3.8 Peak Horsepower
with 3840 oz-in Peak Torque @ 84% Efficiency. The motor
controller is a "4QD-300" with a single end speed pot and has
many fail-safes built in for reliable long time use. I am
running Marine Deep Cycle batteries and am able to see on an
easy-to-read monitor battery voltage, energy consumption at the
moment and since last charge, mph at the moment and miles since
last charge, using a "Cycle Analyst". The 80 Ton GE Industrial
Switcher has regenerative braking, hand/parking disc brake, 24V
headlamp, and 24V compressor with 2-tone air horns.
for this work horse.
Reduced to $6,075
Shipping and crating are not
included in this price. Come and feel the power at her throttle!
The 80 Tonner is located in NW Ohio, near Toledo. Contact me
7.5" ga. Battleship Gondola
This car is a scale Battleship Gon built from the original
drawings. It is 1.5" scale and 7.5" gauge. It is constructed
with 12 ga. metal hopper body on a 3/16" center frame. It has
fully suspended and functional Buckeye trucks, Tom Bee couplers,
Connie Miracle graphics, and Precision Steel Car brake wheel.
I am reducing my inventory and am asking $2,400.
Shipping and crating is not included in this price. This car
looks and tracks GREAT and is located in NW Ohio, near Toledo. .
Two 7.5" ga. Drop Center Cars w/
I have two (2) 1.5" scale 7.5" ga. Drop Center Flat Cars for
sale. The cars are identical and were built to handle
passengers, or, remove the seat and haul freight. These cars
will carry 1,000 lbs. of cargo and ride on fully functional
suspended Buckeye Trucks. The seats are padded, the decking is
diamond plate steel, the center frame is 1/4" box tubing, and
the cars are equipped with Tom Bee couplers.
I am asking
$1,900 for each car.
Reduced to $1,775
Shipping and crating are not included in
the price of the car. The cars are located in NW Ohio, near
7.5" ga. Toy Box Caboose
7.5" This is an original "TOY BOX" Caboose
produced in the mid sixties era and transformed to ride the
rails! This caboose is 1.5" scale and 7.5" ga. I have painted
the body, which has preserved the plastic, and added the
graphics. The platform and step castings are in great condition.
It rides on Tom Bee trucks and tracks wonderfully.
I am asking $1,500
for the Caboose. Reduced to $1,350
Shipping and crating
are not included in the price of the car. The car is located in
NW Ohio, near Toledo.
Info Request Form